Original Papers

(1) Al–7.3 mass%Mg合金の粒界破壊に及ぼす微量Fe添加の影響
大手里奈, 山田貴洋, 上杉徳照, 瀧川順庸, 東健司
軽金属, Vol. 69, pp. 457-464 (2019).
https://doi.org/10.2464/jilm.69.457

(2) Mechanical properties and microstructures after abnormal grain growth in electrodeposited Ni–W alloys
I. Matsui, A. Watanabe, T. Uesugi, N. Omura, Y. Takigawa, T. Yamamoto
Materialia, Vol. 8, 100481 (2019).
https://doi.org/10.1016/j.mtla.2019.100481

(3) Suppression of the thermal embrittlement induced by sulfur segregation to grain boundary in Ni-based electrodeposits
I. Matsui, Y. Hisai, T. Uesugi, N. Omura, Y. Takigawa, K. Higashi
Materialia, Vol. 6, 100312 (2019).
https://doi.org/10.1016/j.mtla.2019.100312

(4) Al-Cu-Mg合金とAl-Zn-Mg-Cu合金の粒界破壊に及ぼすZr添加の影響
大手里奈, 吉岡浩司, 上杉徳照, 瀧川順庸, 東健司
軽金属, Vol. 69, pp. 235-241 (2019).
https://doi.org/10.2464/jilm.69.235

(5) Artificial neural network assisted by first-principles calculations for predicting transformation temperatures in shape memory alloys
D. Minami, T. Uesugi, Y. Takigawa, K. Higashi
International Journal of Modern Physics B, Vol. 33, 1950055 (2019).
https://doi.org/10.1142/S0217979219500553

(6) Al-8Mg alloy with high strength and high ductility by addition of a grain boundary strengthening element
M. Ninomiya, R. Ohte, T. Uesugi, Y. Takigawa, K. Higashi
Materials Letter, Vol. 245, pp. 218-221 (2019).

(7) Ductile electrodeposited Al from a dimethylsulfone bath with trace amounts of tin chloride
C. Kuma, K. Sato, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Materials Letters, Vol. 244, pp. 192-194 (2019).

(8) Reduction of impurity contents in aluminum plates electrodeposited from a dimethylsulfone-aluminum chloride bath
C. Kuma, K. Sato, Y. Hanaoka, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Journal of Alloys and Compounds, Vol. 783, pp. 919-926 (2019).

(9) Development of Electrodeposition Process Based on Chloride Electrolytes for Bulk Pure Fe with Plastic Deformability
Y. Ogura, M. Kanetake, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Materials Transactions, Vol. 60, pp. 130-135 (2019).

(10) 高延性を有する電析バルクナノ結晶Ni-W合金におけるW含有量の増加
児玉勇人, 森宏樹, 松井功, 瀧川順庸, 上杉徳照, 東健司
表面技術, Vol. 70, pp. 50-52 (2019).

(11) Revealing the intrinsic ductility of electrodeposited nanocrystalline metals
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi, K. Higashi
Materials Letters, Vol. 235, pp. 224-227 (2019).

(12) FeCrSi繊維強化Al合金基複合材料の高温変形構成式の構築
府山伸行, 青木良晃, 上杉徳照, 瀧川順庸, 東 健司
材料, Vol. 67, pp. 1000-1005 (2018).

(13) Fabrication of Defect-Free Fe-Mn Alloys by Using Electrodeposition
Y. Ogura, H. Mori, Y. Takigawa, T. Uesugi and K. Higashi
Materials Transactions, Vol. 59, pp. 935-938 (2018).

(14) Fabrication of Electrodeposited Permalloys with High Strength and High Ductility
M. Kanetake, Y. Takigawa, T. Uesugi and K. Higashi
Materials Transactions, Vol. 59, pp. 598-601 (2018).

(15) First-principles study of transformation strains and phase stabilities in α″ and β Ti-Nb-X alloys
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
Journal of Alloys and Compounds, Vol. 716, pp. 37–45 (2017).

(16) 複合サイクル腐食試験によるAl-5Mg-0.15Ca溶射皮膜の評価
足立振一郎, 上杉徳照, 井上博之, 東健司
溶射, Vol. 54, pp. 55-57 (2017).

(17) Improvement of High Temperature Strength by Addition of Vanadium Content of Ni–Cr–Mo Steel for Brake Discs
N. Harada, T. Uesugi, Y. Takigawa and K. Higashi
ISIJ International, Vol. 57, pp. 550-557 (2017).

(18) Al-5Mg合金溶射皮膜における添加元素が引張密着強度に及ぼす影響
足立振一郎, 井上博之, 上杉徳照, 東健司, 植野修一
溶射, Vol. 53, pp. 103-105 (2016).

(19) Effect of Alloying Element X on Transformation Strains and Phase Stabilities between αʹʹ and β Ti-Nb-X (X = Al, Sn, Zr, Ta) Ternary Alloys from First -Principles Calculations
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 57, pp. 263-268 (2016).

(20) Calculation of alloying effect on formation enthalpy of TiCu intermetallics from first-principles calculations for designing Ti–Cu-system metallic glasses
N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
Philosophical Magazine Letters, Vol. 96, pp. 27-34 (2016).

(21) Effects of Solute Fe, Zn and Mg on Recrystallization in Aluminum
K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 57, pp. 329-334 (2016).

(22) Reduction in sulfur content of electrodeposited bulk nanocrystalline Fe–Ni alloys using manganese chloride
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters, Vol. 175, pp. 86-88 (2016).

(23) Effect of Solute Elements on Grain Refinement during Friction Stir Processing in High-Purity Aluminum
T. Uesugi, H. Iwami, Y. Takigawa, K. Higashi
Materials Science Forum Vols. 838-839, pp. 116-121 (2016).

(24) Texture Change during Superplastic Deformation in Fine-Grained Magnesium Alloys
H. Watanabe, T. Uesugi, Y. Takigawa, K. Higashi
Materials Science Forum Vols. 838-839, pp. 59-65 (2016).

(25) Mg-6%Al-1%Zn-2%Ca合金のMIG溶接
瀧川順庸, 味原颯大, 松下遼, 上田光二, 木ノ本裕, 上杉徳照, 東健司
軽金属, Vol. 66, pp. 252-257 (2016).

(26) Achieving room-temperature superplasticity in an ultrafine-grained Zn-22% Al alloy
T. Uesugi, Y. Takigawa, M. Kawasaki, K. Higashi
Letters on Materials, Vol. 5, pp. 269-275 (2015).

(27) The evaluation parameters for glass-forming ability in Ti–Cu system metallic glasses
N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters, Vol. 139, pp. 73-76 (2015).

(28) Mechanical Behavior of Electrodeposited Bulk Nanocrystalline Fe-Ni Alloys
I. Matsui, H. Mori, T. Kawakatsu, Y. Takigawa, T. Uesugi, K. Higashi
Materials Research, Vol. 18, pp. 95-100 (2015).

(29) Significance of Si impurities on exceptional room-temperature superplasticity in a high-purity Zn-22%Al alloy
T. Uesugi, M. Kawasaki, M. Ninomiya, Y. Kamiya, Y. Takigawa, K. Higashi
Materials Science and Engineering A, Vol. 645, pp. 47-56 (2015).

(30) Development of highly efficient saving processes of rare earth in R-T-B permanent magnet
A. Saguchi, T. Uesugi, Y. Takigawa and K. Higashi
Physics Procedia, Vol. 54, pp. 168-173 (2014).

(31) Development of new high-strength and heat-resistant Mg-Zn-Y-X (X = Zr and Ag) casting alloys
Y. Ienaga, K. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum, Vol. 783-786, pp. 384-389 (2014).

(32) Preparatory electrodeposition process for high purity bulk aluminum
Y. Hanaoka, S. Ono, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vol. 922, pp. 237-241 (2014).

(33) Effect of small addition of Si on superplastic elongation at room temperature in Zn-Al eutectoid superplastic alloy
Y. Kamiya, M. Ninomiya, T. Uesugi, Y. Takigawa and K. Higashi
Advanced Materials Research, Vol. 922, pp. 328-331 (2014).

(34) Relationship between strength and grain size of friction stir processed and annealed high purity aluminum
S. Kobayashi, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vol. 922, pp. 372-375 (2014).

(35) Influence of impurities on mechanical properties of electrodeposited bulk nanocrystalline Al
S. Ono, Y. Hanaoka, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vol. 922, pp. 574-579 (2014).

(36) Influence of filler rod composition on the strength of tungsten inert gas welded magnesium alloy joint
S. Shimomura, T. Minomo, Y. Takigawa, T. Uesugi, M. Ueda, Y. Kinomoto and K. Higashi
Advanced Materials Research, Vol. 922, pp. 663-666 (2014).

(37) Design and fabrication of new Ti-based ternary metallic glasses based on effective atomic radius in the Ti solid solution calculated by ab-initio calculation
N. Shirasawa, R. Ito, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vol. 922, pp. 671-675 (2014).

(38) Dislocation creep in al-22.2, 53.6 and 101 at.ppm Fe solid solution alloys
K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
Advanced Materials Research, Vol. 922, pp. 749-754 (2014).

(39) Fabrication of bulk nanocrystalline Fe-Ni alloys with high strength and high ductility by an electrodeposition
I. Matsui, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters, Vol. 116, pp. 71-74 (2014).

(40) Contribution of interstitial solute strengthening in aluminum
I. Matsui, S. Ono, Y. Hanaoka, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine Letters, Vol. 94, pp. 63-71 (2014).

(41) Enhancement in mechanical properties of bulk nanocrystalline Fe-Ni alloys electrodeposited using propionic acid
I. Matsui, H. Mori, T. Kawakatsu, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A, Vol. 607, pp. 505-510 (2014).

(42) Prediction and fabrication of Ti–Zr–Co ternary metallic glasses based on effective atomic radius in Ti solid solution from first-principles calculations
N. Shirasawa, R. Ito, Y. Takigawa, T. Uesugi and K. Higashi
Journal of Non-Crystalline Solids, Vol. 400, pp. 67-71 (2014).

(43) Strategy for electrodeposition of highly ductile bulk nanocrystalline metals with a face-centered cubic structure
I. Matsui, Y. Takigawa, D. Yokoe, T. Kato, T. Uesugi and K. Higashi
Materials Transactions, Vol. 55, pp. 1859-1866 (2014).

(44) Microstructure and Mechanical Properties of the Heat-Resistant Mg-Zn-Y-Ag Cast Alloys with Long-Period Stacking Ordered Structures
Y. Ienaga, K. Inoue, T. Uesugi and K. Higashi
Journal of the Japan Institute of Metals, Vol. 77, pp. 159-164 (2013).

(45) Enthalpies of Solution in Ti-X (X = Mo, Nb, V and W) Alloys from First-Principles Calculations
T. Uesugi, S. Miyamae and K. Higashi
Materials Transactions, Vol. 54, pp. 484-492 (2013).

(46) First-Principles Calculation of Grain Boundary Excess Volume and Free Volume in Nanocrystalline and Ultrafine-Grained Aluminum
T. Uesugi and K. Higashi
Materials Transactions, Vol. 54, pp. 1597-1604 (2013).

(47) First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys
T. Uesugi and K. Higashi
Computational Materials Science, Vol. 67, pp. 1-10 (2013).

(48) Effect of interstitial carbon on the mechanical properties of electrodeposited bulk nanocrystalline Ni
I. Matsui, T. Uesugi, Y. Takigawa and K. Higashi
Acta Materialia, Vol. 61, pp. 3360-3369 (2013).

(49) Effect of Addition of Small Amount of Zinc on Microstructural Evolution and Thermal Shock Behavior in Low-Ag Sn-Ag-Cu Solder Joints during Thermal Cycling
N. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 54, pp. 796-805 (2013).

(50) Effect of additives on tensile properties of bulk nanocrystalline Ni-W alloys electrodeposited from a sulfamate bath
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters, Vol. 99, pp. 65-67 (2013).

(51) Accommodation mechanisms for grain boundary sliding as inferred from texture evolution during superplastic deformation
H. Watanabe, K. Kurimoto, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine, Vol. 93, pp. 2913-2931 (2013).

(52) Effect of orientation on tensile ductility of electrodeposited bulk nanocrystalline Ni-W alloys
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A, Vol. 578, pp. 318-322 (2013).

(53) Pre-electrodeposition process for improving tensile ductility of Al electrodeposited from a dimethylsulfone bath
I. Matsui, Y. Hanaoka, S. Ono, Y. Takigawa, T. Uesugi and K. Higashi
Materials Letters, Vol. 109, pp. 229-232 (2013).

(54) Casting Process and Mechanical Properties of Large-Scale Extruded Mg-Zn-Y Alloys
Y. Ienaga, K. Inoue, T. Uesugi and K. Higashi
SAE Technical Paper, 2013-01-0979 (2013).

(55) 粒界過剰体積の第一原理計算と超微細粒・ナノ結晶アルミニウムの自由体積
上杉徳照, 東健司
軽金属, Vol. 62, pp. 464-471 (2012).

(56) 第一原理計算によるチタン合金の合金設計
上杉徳照，宮前将，東健司
溶融塩および高温化学, Vol. 55, pp. 108-114 (2012).

(57) Threshold stress for superplasticity in solid solution magnesium alloys
H. Watanabe, A. Owashi, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine, Vol. 92, pp. 787-803 (2012).

(58) Improvement in tensile ductility of electrodeposited bulk nanocrystalline Ni-W by sulfamate bath using propionic acid
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Microelectronic Engineering, Vol. 91, pp. 98-101 (2012).

(59) Effects of Zn addition and aging treatment on tensile properties of Sn-Ag-Cu alloys
N. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
Journal of Alloys and Compounds, Vol. 527, pp. 226–232 (2012).

(60) Fabrication of bulk nanocrystalline Al electrodeposited from a dimethylsulfone bath
I. Matsui, S. Ono, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A, Vol. 550, pp. 363-366 (2012).

(61) Optimization of the Mg-Al-Zn-Ca-Sr　alloy　composition　based on the parameter　A’ in the　constitutive　equation for the climb-controlled　dislocation　creep　including the stacking　fault　energy
K. Hirai, I. Takeuchi, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science and Engineering A, Vol. 551, pp. 19-24 (2012).

(62) Segregation of Alkali and Alkaline Earth Metals at Σ11(113)[110] Grain Boundary in Aluminum from First-Principles Calculations
T. Uesugi and K. Higashi
Materials Transactions, Vol. 53, pp. 1699-1705 (2012).

(63) Isotropic superplastic flow in textured magnesium alloy
H. Watanabe, K. Kurimoto, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science and Engineering A, Vol. 558, pp. 656-662 (2012).

(64) Application of Electroforming Process to Bulk Amorphous Ni-W Alloy
Y. Takigawa, S. Wakayama, I. Matsui, T. Uesugi and K. Higashi
Materials Transactions, Vol. 52, pp. 37-40 (2011).

(65) Grain Boundary Relaxation in Fine-grained Magnesium Solid Solutions
H. Watanabe, A. Owashi, T. Uesugi, Y. Takigawa and K. Higashi
Philosophical Magazine, Vol. 91, pp. 4158-4171 (2011).

(66) Effect of Mg content on the minimum grain size of Al–Mg alloys obtained by friction stir processing
T. Morishige, T. Hirata, T. Uesugi, Y. Takigawa, M. Tsujikawa and K. Higashi
Scripta Materialia, Vol. 64, pp. 355-358 (2011).

(67) Influence of Bath Composition on Tensile Ductility in Electrodeposited Bulk Nanocrystalline Nickel
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Transactions, Vol. 52, pp. 142-146 (2011).

(68) First-principles calculation of grain boundary energy and grain boundary excess free volume in aluminum: role of grain boundary elastic energy
T. Uesugi and K. Higashi
Journal of Materials Science, Vol. 46, pp. 4199-4205 (2011).

(69) Enhanced tensile ductility in bulk nanocrystalline nickel electrodeposited by sulfamate bath
I. Matsui, Y. Takigawa, T. Uesugi, and K. Higashi
Materials Letters, Vol. 65, pp. 2351-2353 (2011).

(70) Dynamic Friction Properties and Microstructural Evolution in AZ31 Magnesium Alloy at Elevated Temperature during Ring Compression Test
N. Nishioka, L.F. Chiang, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 52, pp. 1575-1580 (2011).

(71) 高温リング圧縮試験によるアルミニウム合金の動的摩擦係数の調査
江立夫, 西岡典昭, 王建義, 細川裕之, 上杉徳照, 瀧川順庸, 東健司
材料, Vol. 60, pp. 838-843 (2011).

(72) 各種光沢剤を添加したスルファミン酸浴から作製したバルクナノ結晶Niの引張特性
松井功, 岩見英明, 瀧川順庸, 上杉徳照, 東健司
表面技術, Vol. 62, pp. 686-690 (2011).

(73) Solute Segregation at Σ11(113)[110] Grain Boundary and Effect of the Segregation on Grain Boundary Cohesion in Aluminum from First Principles
T. Uesugi and K. Higashi
Materials Science Forum, Vols. 654-656, pp. 942-945 (2010).

(74) Tensile Properties of Bulk Nanocrystalline Ni and Ni-W Fabricated by Sulfamate Bath
I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science Forum, Vols. 654-656, pp. 1114-1117 (2010).

(75) Effect of Tool Materials on Dynamic Friction Characteristics and Microstructural Evolution at Elevated Temperature in Extruded AZ31 Magnesium Alloy
L.F. Chiang, N. Nishioka, J.Y. Wang, H. Hosokawa, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 51, pp. 477-481 (2010).

(76) Investigation on Dynamic Friction Properties of Extruded AZ31 Magnesium Alloy Using by Ring Upsetting Method
L. F. Chiang, H. Hosokawa, J. Y. Wang, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 51, pp. 1249-1254 (2010).

(77) Effect of Small Addition of Zinc on Creep Behavior of Tin
N. Hamada, M. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 51, pp. 1747-1752 (2010).

(78) Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr55Al10Ni5Cu30 Bulk Metallic Glass
J. Kobata, T. Kimura, Y. Takigawa, T. Uesugi, H. Kimura and K. Higashi
Materials Transactions, Vol. 50, pp. 2355-2358 (2009).

(79) Fe-13.5Cr-1.3Mo-0.4C系ステンレス鋼におけるEqual-cannel angular extrusionを用いた高硬度化プロセスについて
今井順二、濱田糾、上杉徳照、瀧川順庸、東健司
材料, Vol.57, pp.105-111, (2008).

(80) 超急冷凝固されたFe-13.5Cr-1.3Mo-0.4C系ステンレス鋼における高硬度化プロセスの最適化
今井順二、濱田糾、上杉徳照、瀧川順庸、東健司
材料, Vol. 57, pp.704-711, (2008).

(81) リング圧縮試験を用いたAZ31マグネシウム押出材の温間域における動的摩擦係数の調査
江立夫、細川裕之、王建義、上杉徳照、瀧川順庸、東健司
塑性と加工, Vol. 49, pp. 901-905, (2008).

(82) Softening by Coarsening of Ni-Al B2 Phase Particles in Fe-Cr-Ni-Al-Zr Alloy
J. Imai, T. Hamada, T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol. 49, pp. 489-493 (2008).

(83) Effect of Initial Grain Size on Dynamically Recrystallized Grain Size in AZ31 Magnesium Alloy
Y. Takigawa, M. Honda, T. Uesugi and K. Higashi
Materials Transactions, Vol.49, pp.1979-1982 (2008).

(84) First-principles calculations of grain boundary γ-surface for various grain boundaries with different energies in aluminum
T. Uesugi, Y. Inoue, Y. Takigawa and K. Higashi
Materials Science Forum Vols. 551-552 pp. 331-336 (2007).

(85) Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles
T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum, Vols. 561-565, pp. 977-980 (2007).

(86) Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys
M. Honda, T. Uesugi, Y. Takigawa, H. Mabuchi and K. Higashi
Advanced Materials Research, Vols. 26-28, pp. 449-452 (2007).

(87) Dynamic Recrystallization during Hot Extrusion in Mg-3Al-0.1Y Alloy
T. Noro, T. Uesugi, Y. Takigawa, M. Tsujikawa, H. Mabuchi and Higashi
Advanced Materials Research, Vols. 26-28, pp. 433-436 (2007).

(88) Stacking Fault Energy of Cu-Ga Alloys from First Principles
S. Fujita, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum, Vols. 561-565, pp. 1915-1918 (2007).

(89) Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Process
S. Wakayama, Y. Kimono, Y. Takigawa, T. Uesugi and K. Higashi
Materials Science Forum, Vols. 561-565, pp. 1375-1378 (2007).

(90) Effect of Co-doping on Phase Stability of Zirconia Bioceramics in Hot Water
S. Yuhara, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vols. 26-28, pp. 773-776 (2007).

(91) Effect of Small Amount of Dopant on Phase Stability of Zirconia Bioceramics
Y. Takigawa, T. Uesugi and K. Higashi
Materials Science Forum, Vols. 561-565, pp. 1561-1564 (2007).

(92) First-Principles Studies on Grain Boundary Energy of [110] Tilt Grain Boundaries in Aluminum
Y. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum, Vols. 561-565, pp. 1837-1840 (2007).

(93) Effect of Ca and Sr content on room and high temperature mechanical properties of a cast AZ91 Magnesium Alloy
I. Takeuchi, K. Hirai, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vols. 26-28, pp. 141-144 (2007).

(94) Mechanical Properties of Twin Roll Cast AZ91 Magnesium Alloy at Room Temperature
S. Uchida, I. Takeuchi, G. Gonda, K. Hirai, T. Uesugi, Y. Takigawa and K. Higashi
Advanced Materials Research, Vols. 26-28, pp. 145-148 (2007).

(95) Microstructure and Mechanical Properties in Friction Stir Processed Zr-Al-Ni-Cu Bulk Metallic Glass
J. Kobata, Y. Takigawa, S.W. Chung, H. Tsuda, T. Uesugi, H. Kimura and K. Higashi
Materials Science Forum, Vols. 561-565, pp. 1345-1348 (2007).

(96) Fabrication of Homogeneous Bulk Nanocrystalline Ni-W Alloys be an Electroforming Process
A. Fujii, Y. Kimoto, S. Wakayama, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vols. 26-28, pp. 691-694 (2007).

(97) Effect of Second Phase Particles on Phase Stability of Zirconia in Hot Water
T. Shibano, Y. Takigawa, T. Uesugi and K. Higashi
Advanced Materials Research, Vols. 26-28, pp. 781-784 (2007).

(98) Effect of manganese addition on strength and fracture toughness in Mg-6Al-1Zn alloy
T. Sasaki, T. Uesugi, Y. Takigawa and K. Higashi
Key Engineering Materials, Vols. 306-308, pp. 857-862 (2006).

(99) Deformation Mechanism of Nanocrystalline Al-Fe Alloys by Analysis from Ab-Initio Calculations
T. Uesugi, Y. Takigawa and K. Higashi
Materials Science Forum, Vol. 503-504, pp.209-214 (2006).

(100) Materials Design for High-Strength Mg-Based Alloys by Understanding from Ab Initio Calculation
T. Uesugi and K. Higashi
Materials Science Forum, Vol.488-489, pp.131-134 (2005).

(101) Elastic constants of AlLi from first principles
T. Uesugi, Y. Takigawa and K. Higashi
Materials Transactions, Vol.46, pp.1117-1121 (2005).

(102) Grain Boundary Sliding of Σ5(001) Twist Grain Boundary in Aluminium Bicrystal from First-Principles Calculations
T. Uesugi, K. Tsuchiya, M. Kohyama and K. Higashi
Materials Science Forum, Vol.447-448, pp.27-32 (2004).

(103) Generalized Stacking Fault Energy and Dislocation Properties for Various Slip Systems in Magnesium: a First-Principles Study
T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
Materials Science Forum, Vol.419, pp.225-230 (2003).

(104) Molecular Dynamics Simulation of Triazine Dithiol / MgO Interface
N. Hamada, T. Uesugi, H. Torii and K. Higashi
Materials Science Forum, Vol.419, pp.557-562 (2003).

(105) Atomic Size Effects on Al, Ca and Sc in Mg Solid Solutions from First-Principles Calculations
T. Uesugi, M. Kohyama, K. Higashi
Materials Science Forum, Vol.426, pp.599-603 (2003).

(106) Ab initio study on divacancy binding energies in aluminum and magnesium
T. Uesugi, M. Kohyama and K. Higashi
Physical Review B, Vol.68, 184103 (2003).

(107) Ab Initio Calculation on the Structure and Elastic Properties of a Magnesium-Lithium Alloy
T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
Materials Transactions, Vol.42, pp.1167-1171 (2001).

(108) Ab Initio Study on the Structure of Mg-Li Alloys
T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi
Materials Science Forum, Vol.350-351, pp.49-54 (2000).

 

 

 

 

Conference proceedings

(1) Alloying Effects of Transition Metals on Beta Phase Stability of Ti Alloys from First-Principles Calculations
Proceedings of Ti-2015: The 13th World Conference on Titanium, pp.1919-1923 (2016).
T. Uesugi, S. Miyamae, Y. Takigawa and K. Higashi

(2) Effect of Transition Metals on Enthalpy Change in Alpha and Beta Ti Alloys from First-Principles Calculations
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 91-92 (2016).
T. Uesugi, S. Miyamae, Y. Takigawa and K. Higashi

(3) Effect of Period 4 Elements on Work Function in Aluminum from First-Principles Calculations
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 621-623 (2016).
T. Higuchi, T. Uesugi, H. Inoue, Y. Takigawa and K. Higashi

(4) Effects of Third Elements on Shape Memory Properties of Ti-Nb-X Ternary Alloys from First-Principles Calculations
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 878-881 (2016).
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi

(5) Grain Boundary Energy of Σ13 [0001] Twist Grain Boundary in MgB2 from First-Principles Calculations
Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, pp. 914-916 (2016).
Y. Hisai, T. Uesugi, Y. Takigawa and K. Higashi

(6) Design of high-strength aluminum alloys based on first-principles calculations of misfit strain and grain boundary cohesion
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 552-563 (2015).
T. Uesugi and K. Higashi

(7) Effect of transition elements on specific electrical resistance in Aluminum from first-principles calculations
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 561-567 (2015).
T. Higuchi, T. Uesugi, Y. Takigawa and K. Higashi

(8) Effects of transition metals on elastic moduli of binary β-Ti alloys from first-principles calculations
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, 568-576 (2015).
A. Koyano, T. Uesugi, Y. Takigawa and K. Higashi

(9) Effects of third elements on shape memory properties of Ti-Nb-X and Ti-Mo-X ternary alloys from first-principles calculations.
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 577-581 (2015).
D. Minami, T. Uesugi, Y. Takigawa and K. Higashi

(10) Study of solute atoms and precipitates affecting recrystallization temperature in high purity Al-Fe alloy
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 686-692 (2015).
K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi

(11) Reduction of embrittlement elements in electrodeposited Al by alloying
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 745-748 (2015).
C. Kuma, Y. Hanaoka, Y. Takigawa, T. Uesugi and K. Higashi

(12) Fabrication of new Ti-Zr-Cu-Ga bulk metallic glasses
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 749-752 (2015).
Y. Ohashi, N. Shirasawa, Y. Takigawa, T. Uesugi and K. Higashi

(13) Elevating W content of high ductility electrodeposited bulk nanocrystalline Ni–W alloys
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 753-756 (2015).
H. Kodama, H. Mori, Y. Takigawa, T. Uesugi and K. Higashi

(14) Improvement in plastic elongation at room temperature of electrodeposited bulk nanocrystalline Fe–Ni alloys by reducing sulfur content
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XXIV, pp. 757-762 (2015).
H. Mori, I. Matsui, Y. Takigawa, T. Uesugi and K. Higashi

(15) Modeling Solid Solution Strengthening Using First-Principles Results of Misfit Strain with Friedel Model in Al-Based Alloys
Proceeding of the 12th International Conference on Aluminium Alloys (ICAA), pp. 1421-1425 (2010).
T. Uesugi and K. Higashi

(16) Creep Resistant Mg-Al-Zn-Ca-Sr alloy
Magnesium Technology 2009 : Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society , pp. 143-144 (2009).
K. Hirai, T. Uesugi, Y. Takigawa and K. Higashi

(17) Application of Misfit Strain Calculated from First principles in Solid Solution Strengthening of Al-based Alloys
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 183-192 (2009).
T. Uesugi and K. Higashi

(18) Threshold Stress for Superplastic Flow in Fine-Grained Dilute Magnesium Alloys
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 461-466 (2009).
A. Owashi, H. Watanabe, T. Uesugi, Y. Takigawa and K. Higashi

(19) Friction Coefficient and its Effect on Texture of Extruded AZ31 Magnesium Alloy in Ring Compression Test
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 467-472 (2009).
N. Nishioka, L. F. Chiang, T. Uesugi, Y. Takigawa, and K. Higashi

(20) Effects of Heavy Metal Additions on Deformation Characteristics at Elevated Temperatures in Magnesium
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 483-486 (2009).
K. Sumimoto, T. Uesugi, Y. Takigawa and K. Higashi

(21) First-principles Studies on Magnesium Σ10 Grain Boundary: Effects of Al and Y Solute Atoms
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 2067-2074 (2009).
R. Nishihara, T. Uesugi, Y. Takigawa, and K. Higashi

(22) Mechanical Properties in Aluminum Lanthanum Alloys Produced by Electron-Beam Deposition
Proceedings of Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 251-256 (2009).
W. Kinoshita, Y. Takigawa, T. Uesugi and K. Higashi

(23) Plastic Deformation Behavior of Zr-based Bulk Metallic Glass with Different Pre-introduced Shear Bands Direction
Proceedings of a Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 1805-1812 (2009).
T. Kimura, J. Kobata, Y. Takigawa, T. Uesugi, H. Kimura and K. Higashi

(24) Glass Transition and Crystallization Behavior of Zr-Based Metallic Glass under Rapid Heating
Proceedings of a Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 1813-1818 (2009).
Y. Sakamoto, Y. Saotome, K. Amiya, Y. Takigawa, T. Uesugi, and K. Higashi

(25) Influence of bath Composition on Characteristics in an Electrodeposited Bulk Nanocrystalline Ni
Proceedings of a Processing and Fabrication of Advanced Materials (PFAM) XVIII, pp. 933-936 (2009).
I. Matsui, Y. Takigawa, T. Uesugi, and K. Higashi

(26) Toward understanding in atomistic scale of grain boundary plasticity
Proceedings of the 3rd JSME/ASME International Conference on Material and Processing, ICM&P 2008, 72403, (2008).
T. Uesugi and K. Higashi

(27) Deformation Behavior of Zr-based Bulk Metallic Glass Matrix Composites in Compression
Progress of Composites 2008 in Asia and Australasia (Proceedings of ACCM-6), pp. 213-214, (2008).
J. Kobata, Y. Takigawa, T. Mukai, T. Uesugi, H. Tsuda, H. Kimura and K. Higashi

(28) Ab Initio Study on Generalized Stacking Fault Energy of Basal Plane in Magnesium
Proceedings of the Second International Conference on Light Materils for Transportation Systems, pp. 255-259 (2001).
T. Uesugi, M. Kohyama, M. Kohzu and K. Higashi

(29) Ab initio study of generalized stacking fault energies in magnesium
Proceedings of the 10th International Conference on Fracture, Advances in Fracture Research, CDROM (2001).
T. Uesugi, M Kohyama, M Kohzu, K Higashi

 

 

 

Book and Review articles

(1) 鉄鋼材料における侵入型溶質原子―置換型溶質原子のナノクラスタリング―
宮本吾郎, 沼倉宏, 榎木勝徳, 上杉徳照, 大谷博司, 古原忠
まてりあ, Vol. 59, 128-33 (2020).
https://doi.org/10.2320/materia.59.128

(2) チタンの計算材料科学
上杉徳照, 佐原亮二,
軽金属, Vol. 67, pp.653-661 (2017).

(3) 自動車軽量化のための材料開発と強度、剛性、強靭性の向上技術
東健司, 瀧川順庸, 上杉徳照 (分担執筆)
第5章　第4節　マグネシウム合金の組織制御と高延性化技術, 技術情報協会, 445-450 (2015).

(4) ミニ特集「材料科学における第一原理計算の進展」企画にあたって
上杉徳照
まてりあ, Vol. 53, pp. 393 (2014).

(5) 第一原理計算の固溶体合金への展開
上杉徳照, 東健司
まてりあ, Vol. 53, pp. 410-413 (2014).

(6) 第一原理計算概論と化合物・希薄合金への摘要
上杉徳照，東健司
金属, Vol. 80, pp. 4-10 (2010)

(7) 第一原理計算による固溶強化型アルミニウム合金の合金設計
上杉徳照、東健司
軽金属学会研究部会報告書, Vol. 46, pp. 57-64 (2005).

(8) 第一原理シミュレーションによる添加元素の最適化設計
上杉徳照, 東健司
軽金属, Vol. 54, pp. 82-89 (2004).